|
|
MULTI-COLOR LIGHTING:
There are two lighting configurations available. "Linked " units and "Self-powered" units are illustrated at left. Be sure to choose your preference when ordering.
Each "Self-powered" unit is a complete assembly consisting of the lighting fixture, the infra red controller (with remote) and includes a 12 volt DC power supply to connect to a 120 volt AC outlet.
"Linked" fixtures connect in series, and are powered by one 12 volt DC power supply using one controller so that the lighting functions will all operate in sequence. The light fixtures can be sized and arranged to suit your specific requirements. The IR controller can handle up to 30 lineal feet of lighted bottle display!
NOTE:
Specify quantities within the shopping cart.
|
|
24 button RGB Controller with IR remote
This LED Controller comes with a wireless infrared (IR) remote control.
MODES: On/Off key, brighten light key, dimming light key, 15 color plus white fixed mode keys and 4 keys that select consecutive change patterns: flash, strobe, fade and smooth. Increasing light and reducing light only has an effect when using fixed color modes. This controller is very easy to use. The 24 button remote uses an infrared light beam to actuate the control circuitry. The beam needs an unobstructed path to the bottle display or can be bounced off of walls or ceiling. It is basically a short range (5 to 10 feet) control.
Included in price
|
44 button RGB Controller w/ IR Remote
This Controller comes with 6 preprogrammed color cycle modes. You can control the speed of the cycles.
MODES: 3 Color Jump (red, green, blue), 7 Color Jump (red, green, blue, yellow, cyan, purple, white), 3 Color Fade and 7 Color Fade, White Strobe and Auto-cycle through all 5 modes. There are also 20 preprogrammed single colors available at the push of a button. With 44 buttons total, including brightness up/down, speed up/ down, pause/play, power on/off and the ability to adjust color channels up and down individually giving you the means to control exactly what color you want.
Included in price
|
ACCESSORIES:
(when accessories are required, you must call to order)
570-445-9126
Extension cables - "Linked" models can be located up to 36" apart with the cables provided. When lights need to be further apart, we offer 13" and 39" long extension cables. Simply plug between the lights to extend the distance. Additional cost:
13" cable $3 each
39" cable $5 each
We can also provide extra long cables to suit your requirements.
Signal amplifiers - When the length of all lights (that will be controlled by one remote) exceeds 30 feet, we provide a signal amplifier with it's own power supply to drive the additional lights in the "chain" at no additional cost.
|
|
|
SINGLE COLOR LIGHTING:
As with multi-color lighting, there are two lighting configurations available. "Linked " units and "Self-powered" units are illustrated at left. Be sure to choose your preference when ordering.
Each "Self-powered" unit is a complete assembly consisting of the lighting fixture, and a 12 volt DC power supply to connect to a 120 volt AC outlet.
"Linked" fixtures connect in series, and are powered by one 12 volt DC power supply. The lights can be sized and arranged to suit your specific requirements. The power supply will be sized to handle the number and length of the lights you order.
NOTE:
Specify quantities within the shopping cart.
|
ACCESSORIES:
(when accessories are required, you must call to order)
570-445-9126
|
Extension cables - "Linked" models can be located up to 36" apart with the cables provided. When lights need to be further apart, we offer 13" and 39" long extension cables. Simply plug between the lights to extend the distance. Additional cost: 13" cable $3 each, 39" cable $5 each. We can also provide extra long cables to suit your requirements.
In-line dimmer/switch(s) - will operate up to 10 feet of lights. $10 each.
Heavy duty dimmer/switch - will operate up to 35 feet of lights. $15 each.
|